NRCell (racora.io/v1alpha1)

Generated at build time from charts/racora-crds/files/nrcell-crd.yaml, the single source of the NRCell schema; edit the source, not this page.

An NRCell is the operator surface of a Racora cell: you declare the radio-facing fields under spec, the controller assigns the cell's identity and reports what it did under status. Every field's description below is the schema's own (kubectl explain nrcell.spec shows the same text on a cluster). The one example cell is what a first declaration looks like; real-radio declarations, written out in YAML, are in Deploy Cells and Connect a Radio.

racora.io/v1alpha1

Resource Types:

• NRCell

NRCell

^{↩ Parent}

Name	Type	Description	Required
apiVersion	string	racora.io/v1alpha1	true
kind	string	NRCell	true
metadata	object	Refer to the Kubernetes API documentation for the fields of the `metadata` field.	true
spec	object		false
status	object		false

NRCell.spec

^{↩ Parent}

Name	Type	Description	Required
band	integer	NR operating band number (OCUDU cell_cfg.band), e.g. 3 (FDD) or 78 (TDD)	true
channelBandwidthMHz	integer	Channel bandwidth in MHz (OCUDU cell_cfg.channel_bandwidth_MHz) Enum: 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100	true
commonScs	integer	Subcarrier spacing in kHz Enum: 15, 30, 60, 120	true
dlArfcn	integer	Downlink ARFCN of the carrier centre (OCUDU cell_cfg.dl_arfcn); the uplink follows the band's duplex spacing	true
plmn	string	PLMN identity (MCC+MNC)	true
tac	integer	Tracking Area Code the cell broadcasts (OCUDU cell_cfg.tac); the core must serve it	true
adminState	enum	Administrative intent for the cell at the CU-CP. Locked = the cell is gracefully stopped (bar, UE release, deactivate) and kept dormant across DU restarts until set back to Unlocked. Applied live over the CU-CP runtime commands and recorded in the boot overlay's logical_cells whitelist. While Locked, the controller also withholds its post-decision reactivation unlock. Enum: Unlocked, Locked Default: Unlocked	false
azimuthDeg	number	Boresight azimuth in degrees (0 = north, 90 = east, clockwise); read by CU-IP with position	false
cellBarred	boolean	Intended MIB cellBarred state: the cell stays on air but UEs may not camp on it. Tracked independently of adminState by the CU-CP. Default: false	false
du	object	The cell's DU workload itself, as opposed to the cell on air (adminState locks a running cell at the CU-CP).	false
duAssignment	object	Placement of this cell's DU pod. A uhd backend always requires a racora.io/rf-ready node and an ofh backend a racora.io/fronthaul-ready node; this narrows it further.	false
mechanicalTiltDeg	number	Mechanical antenna downtilt in degrees. Reserved for CU-IP; no component reads it today Default: 8	false
mobility	object	This cell's contribution to the CU-wide mobility configuration. reportConfigs are unioned by reportCfgId across all cells (define each id once, on one cell, or identically on all — differing definitions of the same id resolve to the lexicographically-first cell name and raise a ReportConfigConflict condition on the others). Controller defaults for ids 1 (periodical) and 2 (A3) remain unless overridden here and are never removable. Field names mirror the OCUDU cu_cp.mobility report_configs keys (camelCase); the controller applies changes to the running CU-CP over the runtime command surface and bakes them into the boot overlay.	false
neighbors	[]object	Directional neighbor relations from this cell (declare the reverse relation on the other cell). Pushed live to the running CU-CP and baked into its boot overlay; the applied state, with provenance, is mirrored under status.neighbors.	false
pci	integer	Physical Cell ID visible to UEs. Optional — when absent, the controller assigns the next available PCI from the temp pool (1002-1007) and the auto-retune workflow replaces it with a non-temp PCI as soon as the cell appears in the substrate graph and CU-IP emits a RANN-D decision. See status.pciSource for assignment provenance. Minimum: 0 Maximum: 1007	false
pdcch	object	Passed through verbatim as OCUDU cell_cfg.pdcch — any key the pinned gNB image accepts; not validated by the API server	false
pdsch	object	Passed through verbatim as OCUDU cell_cfg.pdsch (see pdcch)	false
periodicReportCfgId	integer	Report config id for this cell's serving-cell periodical measurement report (OCUDU periodic_report_cfg_id). Must reference a periodical config; the controller default id 1 reports every 1024 ms. Default: 1	false
position	object	Antenna position in a local Cartesian frame (metres). Read by CU-IP's NRCell watcher for the substrate graph geometry, never by the gNB.	false
prach	object	Passed through verbatim as OCUDU cell_cfg.prach (see pdcch)	false
pusch	object	Passed through verbatim as OCUDU cell_cfg.pusch (see pdcch)	false
radioBackend	object	The radio the DU drives and its parameters. ruType selects the backend; only the matching sub-object is read.	false
ssb	object	Passed through verbatim as OCUDU cell_cfg.ssb (see pdcch), e.g. ssb_block_power_dbm	false
tddUlDlCfg	object	The cell's TDD pattern (OCUDU cell_cfg.tdd_ul_dl_cfg), for an unpaired band. Absent: OCUDU's default pattern, except for an ofh cell, which runs 7 DL slots, a special slot of 6 DL + 4 UL symbols and 2 UL slots over 10 slots unless set here; an ofh cell's O-RU is provisioned with the same pattern.	false

NRCell.spec.du

^{↩ Parent}

The cell's DU workload itself, as opposed to the cell on air (adminState locks a running cell at the CU-CP).

Name	Type	Description	Required
suspend	boolean	true keeps the cell's DU Deployment at 0 replicas: no DU pod, the radio and the node are free, the cell shows phase Suspended and DUServed=False/Suspended, and the controller neither replaces the pod nor pushes the cell's intent. It survives controller restarts and upgrades, unlike a Deployment scaled down by hand, which the controller re-asserts on its next reconcile. false (the default) runs the DU. To take a cell off air while its DU keeps running, lock it with adminState instead. Default: false	false

NRCell.spec.duAssignment

^{↩ Parent}

Placement of this cell's DU pod. A uhd backend always requires a racora.io/rf-ready node and an ofh backend a racora.io/fronthaul-ready node; this narrows it further.

Name	Type	Description	Required
nodeName	string	Pin this cell's DU to a specific Kubernetes node (by hostname), for a multi-node cluster where the cell's radio is on a particular box. Merged with the rf-ready (uhd) or fronthaul-ready (ofh) nodeSelector via the scheduler (not a raw pod nodeName bind), so the node must still carry that capability. For an ofh cell this is the node whose fronthaul port is cabled to the radio. Omit to let the scheduler place it on any eligible node.	false

NRCell.spec.mobility

^{↩ Parent}

This cell's contribution to the CU-wide mobility configuration. reportConfigs are unioned by reportCfgId across all cells (define each id once, on one cell, or identically on all — differing definitions of the same id resolve to the lexicographically-first cell name and raise a ReportConfigConflict condition on the others). Controller defaults for ids 1 (periodical) and 2 (A3) remain unless overridden here and are never removable. Field names mirror the OCUDU cu_cp.mobility report_configs keys (camelCase); the controller applies changes to the running CU-CP over the runtime command surface and bakes them into the boot overlay.

Name	Type	Description	Required
reportConfigs	[]object	Measurement report configurations this cell contributes to the CU-wide set (see mobility)	false

NRCell.spec.mobility.reportConfigs[index]

^{↩ Parent}

Name	Type	Description	Required
reportCfgId	integer	Identifier of this report configuration, referenced from neighbors[].reportConfigs and periodicReportCfgId Minimum: 1 Maximum: 63	true
reportType	enum	periodical: serving-cell reports every reportIntervalMs. event_triggered: a 3GPP A-event evaluated on a neighbor relation. cond_trigger: a conditional-handover trigger (eventTriggeredReportType d1, d2 or t1; no report interval). Enum: periodical, event_triggered, cond_trigger	true
eventTriggeredReportType	enum	The RRC event (3GPP TS 38.331) for event_triggered and cond_trigger configs. a1-a6 are the measurement events; a3 (neighbor better than serving by measTriggerQuantityOffsetDb) is the handover default. d1/d2 (distance-based) and t1 (time-based) are accepted only with reportType cond_trigger. Enum: a1, a2, a3, a4, a5, a6, d1, d2, t1	false
hysteresisDb	integer	Hysteresis in dB applied to the event condition (OCUDU hysteresis_db) Minimum: 0 Maximum: 15	false
measTriggerQuantity	enum	Quantity the event evaluates (OCUDU meas_trigger_quantity) Enum: rsrp, rsrq, sinr	false
measTriggerQuantityOffsetDb	integer	Offset in dB for events A3/A6 — how much better the neighbor must measure (OCUDU meas_trigger_quantity_offset_db) Minimum: -15 Maximum: 15	false
measTriggerQuantityThreshold2Db	integer	Second threshold in dB for event A5 (OCUDU meas_trigger_quantity_threshold_2_db)	false
measTriggerQuantityThresholdDb	integer	Threshold in dB for events A1/A2/A4/A5 (OCUDU meas_trigger_quantity_threshold_db)	false
periodicHoRsrpOffsetDb	integer	RSRP offset for triggering a handover from periodical reports, in field units of 0.5 dB; -1 disables handover from periodical measurements (OCUDU periodic_ho_rsrp_offset_db). Minimum: -1 Maximum: 30	false
reportIntervalMs	integer	Interval between reports once triggered (OCUDU report_interval_ms); mandatory for periodical and event_triggered configs Enum: 120, 240, 480, 640, 1024, 2048, 5120, 10240, 20480, 40960, 60000, 360000, 720000, 1800000	false
t312	integer	T312 in ms: started by the UE on an event-triggered report while T310 (out-of-sync) is running; on expiry the UE declares radio-link failure to re-establish on another cell sooner (OCUDU t312). Enum: 0, 50, 100, 200, 300, 400, 500, 1000	false
timeToTriggerMs	integer	How long the condition must hold before the UE reports (OCUDU time_to_trigger_ms) Enum: 0, 40, 64, 80, 100, 128, 160, 256, 320, 480, 512, 640, 1024, 1280, 2560, 5120	false

NRCell.spec.neighbors[index]

^{↩ Parent}

Name	Type	Description	Required
nrCellRef	string	Name of the neighbor NRCell (same namespace)	true
reportConfigs	[]integer	Report config ids attached to this relation. Must reference event-triggered configs — the CU-CP rejects periodical configs on neighbor relations. Default: [2]	false

NRCell.spec.position

^{↩ Parent}

Antenna position in a local Cartesian frame (metres). Read by CU-IP's NRCell watcher for the substrate graph geometry, never by the gNB.

Name	Type	Description	Required
heightM	number	Antenna height above ground in meters	false
xCoord	number	East coordinate in meters (local Cartesian)	false
yCoord	number	North coordinate in meters (local Cartesian)	false

NRCell.spec.radioBackend

^{↩ Parent}

The radio the DU drives and its parameters. ruType selects the backend; only the matching sub-object is read.

Name	Type	Description	Required
dummyProcessingDelay	integer	For ruType dummy — the dummy RU's downlink processing delay in slots (OCUDU ru_dummy.dl_processing_delay) Default: 1	false
ofh	object	Parameters for ruType ofh — an O-RAN split 7.2 O-RU over open fronthaul (OCUDU ru_ofh). The keys are OCUDU's ru_ofh keys in camelCase; the controller renders the DU's ru_ofh and the O-RU's M-plane provisioning file (ru.yml in the cell's ConfigMap) from them, so the carrier, PRB count, TDD pattern, eAxC ids, VLAN, O-RU MAC and IQ bit width always agree on both ends. The DU runs on the host network of a racora.io/fronthaul-ready node; the fronthaul interface, its MAC address and the F1-U address are resolved there when the DU starts. Unset keys come from the radio profile (profileRef), then from OCUDU's defaults. Unpaired (TDD) bands only.	false
ruType	enum	Radio backend: zmq | dummy (virtual) | uhd (USRP) | ofh (O-RAN 7.2 O-RU over open fronthaul) Enum: zmq, dummy, uhd, ofh Default: dummy	false
uhd	object	Parameters for ruType uhd — a USRP over UHD (OCUDU ru_sdr with device_driver uhd)	false
zmq	object	Parameters for ruType zmq — a virtual radio exchanging IQ samples over ZeroMQ with a UE simulator (OCUDU ru_sdr with device_driver zmq). The controller exposes the DU's port 2000 as a Service.	false

NRCell.spec.radioBackend.ofh

^{↩ Parent}

Parameters for ruType ofh — an O-RAN split 7.2 O-RU over open fronthaul (OCUDU ru_ofh). The keys are OCUDU's ru_ofh keys in camelCase; the controller renders the DU's ru_ofh and the O-RU's M-plane provisioning file (ru.yml in the cell's ConfigMap) from them, so the carrier, PRB count, TDD pattern, eAxC ids, VLAN, O-RU MAC and IQ bit width always agree on both ends. The DU runs on the host network of a racora.io/fronthaul-ready node; the fronthaul interface, its MAC address and the F1-U address are resolved there when the DU starts. Unset keys come from the radio profile (profileRef), then from OCUDU's defaults. Unpaired (TDD) bands only.

Name	Type	Description	Required
comprBitwidthDl	integer	DL IQ bit width (compr_bitwidth_dl). Default 9; DL, UL and PRACH must be equal (one O-RU endpoint bit width) Minimum: 1 Maximum: 16	false
comprBitwidthPrach	integer	PRACH IQ bit width (compr_bitwidth_prach). Default 9 Minimum: 1 Maximum: 16	false
comprBitwidthUl	integer	UL IQ bit width (compr_bitwidth_ul). Default 9 Minimum: 1 Maximum: 16	false
comprMethodDl	enum	DL IQ compression (compr_method_dl). Default bfp, the only method the O-RU endpoints are provisioned with Enum: bfp	false
comprMethodPrach	enum	PRACH IQ compression (compr_method_prach). Default bfp Enum: bfp	false
comprMethodUl	enum	UL IQ compression (compr_method_ul). Default bfp Enum: bfp	false
dlPortId	[]integer	Downlink eAxC ids, one per DL antenna (dl_port_id; sets cell_cfg.nof_antennas_dl); required	false
duMacAddr	string	The DU's fronthaul MAC address (du_mac_addr). Default: the fronthaul interface's own address, read on the node at start	false
enableDlStaticComprHdr	boolean	DL U-plane without a per-section compression header (enable_dl_static_compr_hdr, OCUDU default true). Set it from what the radio expects on the wire; it is independent of mplane.compressionType.	false
enableUlStaticComprHdr	boolean	UL U-plane without a per-section compression header (enable_ul_static_compr_hdr, OCUDU default true)	false
iqScaling	number	Digital IQ scaling of the DL signal (iq_scaling) — a calibration of the radio model	false
isPrachCpEnabled	boolean	Send PRACH C-plane messages (is_prach_cp_enabled)	false
mplane	object	The O-RU's M-plane: how its datastore is written (the provisioning-file keys, which a radio profile may set) and, with netconfHost or callHome, the session the DU pod's mplane sidecar holds to it (cell keys only). With a session the sidecar provisions the O-RU from ru.yml and the DU starts only once the O-RU is supervised and its carriers are active; without one the O-RU must be provisioned before the cell is applied.	false
networkInterface	string	The node's fronthaul interface (network_interface). Default: the port node provisioning selected (fronthaul_nic in /etc/racora/fronthaul-inventory)	false
prachPortId	[]integer	PRACH eAxC ids (prach_port_id); required	false
profileRef	string	Name of a ConfigMap in the cell's namespace whose profile.yaml key holds defaults for these keys (except networkInterface and duMacAddr) — the constants of one radio model, shared by every cell on it. The cell's own keys win; mplane merges key by key. Read when the cell is reconciled.	false
ruMacAddr	string	The O-RU's fronthaul MAC address (ru_mac_addr); required, here or in the profile	false
t1aMaxCpDl	integer	DU transmission window, DL C-plane, latest (t1a_max_cp_dl, microseconds before the air time)	false
t1aMaxCpUl	integer	DU transmission window, UL C-plane, latest (t1a_max_cp_ul, microseconds)	false
t1aMaxUp	integer	DU transmission window, DL U-plane, latest (t1a_max_up, microseconds)	false
t1aMinCpDl	integer	DU transmission window, DL C-plane, earliest (t1a_min_cp_dl, microseconds)	false
t1aMinCpUl	integer	DU transmission window, UL C-plane, earliest (t1a_min_cp_ul, microseconds)	false
t1aMinUp	integer	DU transmission window, DL U-plane, earliest (t1a_min_up, microseconds)	false
ta4Max	integer	DU reception window, UL U-plane, latest (ta4_max, microseconds after the air time)	false
ta4Min	integer	DU reception window, UL U-plane, earliest (ta4_min, microseconds)	false
txGain	number	The O-RU's carrier TX gain in dB (M-plane tx-gain); required, here or in the profile	false
ulPortId	[]integer	Uplink eAxC ids, one per UL antenna (ul_port_id; sets cell_cfg.nof_antennas_ul); required	false
vlanTagCp	integer	C-plane VLAN id (vlan_tag_cp); required, and equal to vlanTagUp (the O-RU is provisioned with one VLAN) Minimum: 1 Maximum: 4094	false
vlanTagUp	integer	U-plane VLAN id (vlan_tag_up); required Minimum: 1 Maximum: 4094	false

NRCell.spec.radioBackend.ofh.mplane

^{↩ Parent}

The O-RU's M-plane: how its datastore is written (the provisioning-file keys, which a radio profile may set) and, with netconfHost or callHome, the session the DU pod's mplane sidecar holds to it (cell keys only). With a session the sidecar provisions the O-RU from ru.yml and the DU starts only once the O-RU is supervised and its carriers are active; without one the O-RU must be provisioned before the cell is applied.

Name	Type	Description	Required
baseInterface	string	The O-RU's own Ethernet interface its VLAN interface is created on	false
callHome	boolean	Accept the O-RU's NETCONF call-home (RFC 8071, TCP 4334 on the node) instead of dialing netconfHost; adds the sidecar	false
compressionType	enum	The O-RU endpoints' compression-type (default STATIC) Enum: STATIC, DYNAMIC	false
credentialsSecret	string	Name of a Secret in the DU's namespace with the O-RU NETCONF account, keys username and password. Mounted read-only into the sidecar; the password never reaches a command line. Required with a session.	false
endpointIndexBase	integer	First index appended to the endpoint prefixes Minimum: 0	false
netconfHost	string	The O-RU's NETCONF address the mplane sidecar dials (port netconfPort). Setting it (or callHome) adds the sidecar	false
netconfPort	integer	The O-RU's NETCONF port Default: 830 Minimum: 1 Maximum: 65535	false
prachEndpointPrefix	string	Name prefix of the O-RU's static PRACH endpoints	false
rxEndpointPrefix	string	Name prefix of the O-RU's static RX endpoints	false
tddCarrierBinding	boolean	Bind the TDD pattern to the carriers (default true; false for an O-RU that never answers the binding edit)	false
tddPatternUpload	boolean	Write the cell's TDD pattern to the O-RU (default true)	false
tolerateReplyTimeout	boolean	Accept an unanswered carrier activation and judge it by the carrier-state readback (default true)	false
txEndpointPrefix	string	Name prefix of the O-RU's static TX endpoints, for an O-RU with fixed endpoint names	false

NRCell.spec.radioBackend.uhd

^{↩ Parent}

Parameters for ruType uhd — a USRP over UHD (OCUDU ru_sdr with device_driver uhd)

Name	Type	Description	Required
clockSource	enum	Clock source (internal for single cell, gpsdo for sync) Enum: internal, external, gpsdo Default: internal	false
deviceArgs	string	UHD device args (e.g., type=b200,serial=3591266) Default: type=b200	false
otwFormat	string	UHD over-the-wire sample format (sc12 halves USB bandwidth on a B210; sc16 is UHD's default) Default: sc12	false
rxGain	integer	RX gain in dB (0-76) Default: 75	false
srate	number	Sample rate in MHz Default: 23.04	false
syncSource	enum	TIME synchronization source (OCUDU ru_sdr `sync`). Defaults to clockSource when that is gpsdo/external. Frame-time alignment across cells (required for connected-mode neighbor measurement and A3 handover) needs a time-capable source with lock on every cell — a disciplined clock alone does not align frames. Enum: internal, external, gpsdo	false
txGain	integer	TX gain in dB (0-89) Default: 75	false

NRCell.spec.radioBackend.zmq

^{↩ Parent}

Parameters for ruType zmq — a virtual radio exchanging IQ samples over ZeroMQ with a UE simulator (OCUDU ru_sdr with device_driver zmq). The controller exposes the DU's port 2000 as a Service.

Name	Type	Description	Required
baseSrate	string	Base sample rate in Hz, as a string (device_args base_srate); must match the UE simulator's Default: 23.04e6	false
rxGain	integer	RX gain in dB (ru_sdr.rx_gain) Default: 75	false
rxPort	string	ZMQ endpoint the DU receives samples from (device_args rx_port); default tcp://srsue..svc.cluster.local:2001, a UE simulator in the controller's ueNamespace	false
srate	number	Sample rate in MHz (OCUDU ru_sdr.srate) Default: 23.04	false
txGain	integer	TX gain in dB (ru_sdr.tx_gain); no physical effect on a virtual radio Default: 75	false
txPort	string	ZMQ endpoint the DU transmits samples on (device_args tx_port); default tcp://0.0.0.0:2000	false

NRCell.spec.tddUlDlCfg

^{↩ Parent}

The cell's TDD pattern (OCUDU cell_cfg.tdd_ul_dl_cfg), for an unpaired band. Absent: OCUDU's default pattern, except for an ofh cell, which runs 7 DL slots, a special slot of 6 DL + 4 UL symbols and 2 UL slots over 10 slots unless set here; an ofh cell's O-RU is provisioned with the same pattern.

Name	Type	Description	Required
dlUlTxPeriod	integer	Pattern period in slots (dl_ul_tx_period) Minimum: 1	true
nofDlSlots	integer	Full downlink slots at the start of the period (nof_dl_slots) Minimum: 0	true
nofDlSymbols	integer	Downlink symbols of the special slot (nof_dl_symbols) Minimum: 0 Maximum: 13	true
nofUlSlots	integer	Full uplink slots at the end of the period (nof_ul_slots) Minimum: 0	true
nofUlSymbols	integer	Uplink symbols of the special slot (nof_ul_symbols) Minimum: 0 Maximum: 13	true

NRCell.status

^{↩ Parent}

Name	Type	Description	Required
conditions	[]object	Kubernetes-style conditions the controller sets: IdentityAllocated, PCIAllocated, ConfigGenerated and ReportConfigConflict from the reconcile; RadioReady and DUReady for an ofh cell with an M-plane session; DUServed from what the CU-CP serves over F1; O1Ready and O1Config from the DU's O1 datastore. Every reason is listed in the NRCell status reference.	false
gnbDuId	integer	Controller-assigned gNB-DU ID (unique per DU; F1AP identity)	false
gnbId	integer	CU-wide gNodeB ID assigned by the controller	false
identitySource	enum	Provenance of the identity fields (always controller-assigned) Enum: controller	false
lastApplied	map[string]object	Per-function record of the most recent CU-IP decision applied to this cell, keyed by decision function name (pci, anr): the apply time and the decision id. The controller's verify-current gate reads it before applying the next decision of that function.	false
lastRetune	object	Audit record of the most recent PCI retune applied by the controller	false
nci	string	Computed NCI (hex)	false
nciDecimal	integer	The NCI as a decimal integer (what the CU-CP's runtime commands take)	false
neighbors	[]object	Applied neighbor relations with provenance (manual = declared in spec; anr = written by a CU-IP ANR decision).	false
pciAssignedAt	string	When the current spec.pci value was last assigned/changed Format: date-time	false
pciSource	enum	Provenance of the current spec.pci value: spec - explicit value provided in NRCell spec controller-temp - controller-assigned temp PCI from the 1002-1007 pool (transient — auto-retune workflow will replace it) controller-retuned - controller-applied recommendation from a CU-IP RANN-D decision (terminal until the next retune) Enum: spec, controller-temp, controller-retuned	false
phase	enum	Pending (temp PCI allocated, reconcile pending), ConfigGenerated (identity resolved, DU generated), Suspended (identity resolved, DU rendered at 0 replicas by spec.du.suspend), Error (see conditions) Enum: Pending, ConfigGenerated, Suspended, Error	false
sectorId	integer	Controller-assigned sector ID (unique per cell)	false

NRCell.status.conditions[index]

^{↩ Parent}

Name	Type	Description	Required
lastTransitionTime	string	When the condition last changed Format: date-time	false
message	string	Human-readable detail	false
reason	string	Machine-readable cause, one of the reasons the NRCell status reference lists for the condition	false
status	enum	Whether the condition holds Enum: True, False, Unknown	false
type	string	IdentityAllocated, PCIAllocated, ConfigGenerated, ReportConfigConflict, RadioReady, DUReady, DUServed, O1Ready or O1Config	false

NRCell.status.lastApplied[key]

^{↩ Parent}

One entry per intelligence function

Name	Type	Description	Required
decisionId	string	The applied decision's decision_id	false
ts	string	When the decision was applied Format: date-time	false

NRCell.status.lastRetune

^{↩ Parent}

Audit record of the most recent PCI retune applied by the controller

Name	Type	Description	Required
decisionId	string	RANN-D decision_id that triggered this retune (format: 'pci:{cell}:spec.pci')	false
from	integer	Previous PCI value	false
reason	string	RANN-D decision reason tags (e.g. 'temp', 'confused', 'temp,confused')	false
to	integer	New PCI value applied	false
ts	string	When the retune was applied Format: date-time	false

NRCell.status.neighbors[index]

^{↩ Parent}

Name	Type	Description	Required
appliedAt	string	When the relation was first applied; kept across later ANR applies Format: date-time	false
nci	string	Neighbor NCI (hex)	false
nrCellRef	string	Name of the neighbor NRCell	false
reportConfigs	[]integer	Report config ids attached to the relation	false
source	enum	manual = declared in spec.neighbors; anr = written by a CU-IP ANR decision (ANR only ever removes relations it created) Enum: manual, anr	false